Instruction manual

-- 41 --
Tops - Series
4. CONFIGURATION MODE
4.10 PASSWORD
The password must be a number maximum 12 digits.
Factory default is set to “0”.
NOTE
1)
7)
2)
3)
4)
5)
6)
1) Select User
1-1) Administrator : Allows access to all DVR functions.
1-2) User1~5 : Log in
(Allows access to functions assigned by Administrator)
1-3) Default User : Log off
(Allows access to functions assigned by Administrator.)
2) PASSWORD – OLD PASSWORD / NEW PASSWORD / CONFIRM
3) Number/Reset/Enter Buttons – Use number/reset/enter buttons to input password.
4) User Name – Enter user name.
5) Function Access – Enables/disables access to PTZ control /Search /Backup functions.
6) Camera Access – Enables/disables channel accessibility.
7) EXIT – Saves setup and returns to surveillance mode.