Instruction manual

-- 40 --
Tops - Series
4.9 NETWORK / HDD
1) HDD – List of all installed HDDs.
2) HDD Information & Configuration - Shows information on selected HDD.
3) LOCAL NAME – Enter DVR network name as supplied by IT administrator.
4) CONNECTION TYPE – Selected a TCP/IP or MODEM.
5) PORT – Firewall open port.
6) SELECT BACKUP HDD – Click the button to exclusively use a drive as a hard disk backup
drive. (Clicking button again reverses this action) (DVR cannot record to a HDD
once it is setup as a HDD backup drive)
7) EXIT – Saves setup and returns to surveillance mode.
DVR server can not allow simultaneous connections by the modem and TCP/IP.
However, it is different when the modem user uses the TCP/IP.
When the network setup is changed, the DVR program restarts automatically.
NOTE
7)
1)
3)
2)
4)
6)
5)
4. CONFIGURATION MODE