Instruction manual

-- 37 --
Tops - Series
9) Motion detect area setup method selection
9-1) Full Region : All areas
9-2) User Defined : User can set specific regions.
10) Sensitivity – Adjusts the sensitivity of the detect regions for the selected camera.
11) Apply to All Camera – The current motion setup is applied to all cameras.
12) Move/Size – Used when changing the size of the detection region.
13) Reset – Deletes previously set motion detection regions.
14) Motion detect status – Blinks when there is movement.
15) Motion detect area setup window – Set using the mouse. Motion status can be checked
through this window.
16) EXIT – Saves setup and returns to surveillance mode.
Motion detection sensitivity is affected by the camera’s performance and what it’s
recording.
There can be a big difference, especially between day and night. Therefore, motion
detection sensitivity must be adjusted according to the time and environment in order to
maximize performance.
NOTE
4. CONFIGURATION MODE