Instruction manual

-- 36 --
Tops - Series
4.6 MOTION / COLOR
1) Camera selection – Select camera.
2) Brightness – Drag the cursor on the Brightness bar to change the brightness value of the
viewed and recorded scene. Adjust the brightness of the scene to compensate for
differences in lighting.
3) Contrast – Drag the cursor on the Contrast bar to change the contrast value of the viewed
and recorded scene. Proper adjustment will allow maximum gradations between the
darkest and lightest parts of a scene.
4) Default – Click the Default Color button to return all color settings to their default settings.
5) Hue – Controls hue.
6) Saturation – Controls saturation.
7) Image location control – Use the image alignment buttons.
(up, down, left, right and center) to align the image within the camera frame.)
8) Capture B/D / Display B/D – Toggle between board type.
16)
15)
1) 2) 3) 4) 5) 6) 7)
9) 10) 11) 12)13)14)
8)
4. CONFIGURATION MODE