Instruction manual

-- 30 --
Tops - Series
4.2 SENSOR / D/O
1) Camera Numbers – Indicates camera numbers.
2) Linked Sensor – Sets the Sensor linked to camera. (Multi-channel capable)
3) Linked Digital Out – Sets the D/O channel to be activated when Sensor linked to camera
is detected.
4) RESET – Erases all current setup.
5) SENSOR TYPE – Select from Normally open and Normally closed mode.
6) D/O TYPE – Select from Normally open and Normally closed mode.
7) DEFAULT – Sets camera, Sensor and D/O to same camera channel.
8) EXIT – Saves setup and returns to surveillance mode.
The sensor is only activated when the recording starts due to sensor trigger.
D/O is only activated according to the D/O activation schedule.
1) 2) 3)
4)
7)
5)
8)
6)
NOTE
4. CONFIGURATION MODE