Instruction manual

-- 28 --
Tops - Series
4.1 CAMERA
1) CAMERA ENABLE/DISABLE – Name enable or disable camera.
2) CAMERA NAME – To name a camera drag the cursor over the text in the camera name
box and type in the new name. Up to 19 characters can be entered in the box.
3) PAN/TILT – Sets the pan/tilt controller attached to the camera.
4) RESOLUTION – Select digital image size from 160x120,320x240,640x480.
5) CAMERA TYPE – Set the NTSC/PAL signal to the correct camera setting for your
location.
6) RX PORT – Select direct communication port to be connected to pan/tilt controller.
(COM1/COM2)
7) EXIT – Saves new setup and returns to surveillance mode.
NTSC (National Television System Committee)
Used in 44 countries. (Korea, Japan, US, Canada, Taiwan……)
PAL (Phase Alternation Line)
Used in 100 countries. (China, Australia, Germany, UK, Brazil……)
1) 2) 3) 4)
5)
6)
7)
NOTE
4. CONFIGURATION MODE