Instruction manual

-- 27 --
Tops - Series
4. CONFIGURATION MODE
1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11)
1) CAMERA – Insert camera name, enable camera and camera type, resolution.
2) SENSOR / D/O – Set the Sensor inputs and Digital outputs.
3) SCHEDULE – Specify recording trigger, start time and end time.
(FULL, MOTION, SENSOR or AUDIO).
4) D/O SCHEDULE – Digital outputs schedule.
5) SPEED – Set the FPS (frames per second) for continuous recording, motion detection,
sensor detection, audio detection and pre-alarm recording.
6) MOTION / COLOR – Alter motion sensitive area (s), adjust color and camera alignment.
7) EXTERNAL MONITOR – Exterior analogue monitor.
8) AUDIO – Enable Audio and sensitivity.
9) NETWORK / HDD – Network connection method and connection name.
10) PASSWORD – Password levels include Administrator, Search User and Client User.
11) SHELL – Stops recording and starts shell mode.
When pushing Exit button, changed setup is saved and returns to surveillance mode.
The administrator password must be used to enter configuration mode.
NOTE