Instruction manual

-- 12 --
Tops - Series
Termination Switch Use
Make switch to “OFF” mode when one camera line is divided to 2 channel and the
quality become low.
Factory default is set to “ON” mode, 75Ω
 Point
USB (Universal Serial Bus) port
USB connection unit – CD-RW, DVD-RW, MODEM, Network HUB, Extension HDD.
Termination Switch
It helps to keep video signal, 75Ω standard impedance. “ON” - 75Ω, “OFF”–Over
10kΩ.(High Impedance)
2. SYSTEM INSTALLATION