User's Manual

Wearing the Vest
All adjusting straps must be loosened before wearing the Vest. Make sure to follow these steps in
order.
• Close and tighten the waist straps.
• Close and tighten the chest strap.
• Pull both shoulder straps in parallel to ensure a tight contact of all haptic units to the body.
Attaching the Vest to a chair
• Attach the Vest to a chair using Woojer Chair Adapter (sold separately)
• Set the Woojer Chair Adapter back holder to the width of your chair
•
Playing
Once you’ve connected the audio source device and headset to the Vest:
• Play your content from the connected source device.
• Use Woojer app for accurate synchronization between audio and haptic.
• Use the Vest’s control buttons to adjust the headphones output levels and sensation levels.
Care and Maintenance
• Keep the Vest Mk. 3™ and accessories device dry. Precipitation, humidity, and all types of
liquids or moisture can contain minerals that will corrode electronic circuits.
• Do not store the device in hot areas. High temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal temperature,
moisture can form inside the device and damage electronic circuit boards.
• Do not attempt to open the device.
• Do not drop. Rough handling can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
• If the device doesn’t work properly, please contact our technical support team through our
website, at www.woojer.com/support