Technical data

Maintenance and Cleaning
02/2014-v1.0en 71
9 Maintenance and Cleaning
WARNING
Danger of injury due to lack of qualifications!
If maintenance or repairs are not carried out by professionally qualified per-
sonnel, this may cause material damage and serious injury.
► Maintenance and repair work may only be performed by qualified person-
nel!
► It is the sole responsibility of the representative to assign qualified person-
nel for maintenance and repair work.
► In case of doubt or questions, always contact WOODWAY customer service
or your dealer!
► The manufacturer is not liable for personal injury and material damage
caused by a lack of qualifications!
9.1 Cleaning
DANGER
Danger of death by electric shock!
The use of water and liquid detergents as part of cleaning work can cause se-
rious or fatal electrical shock.
► No liquids may come in contact with electrical parts such as motor, power
cord and power switch, control monitors.
► Do not spray the device with a water jet.
► Pull power plug before cleaning, equipment must not be connected to
power! Ensure the device cannot be switched back on.
The running surface should be thoroughly cleaned at regular intervals, depending
on the intensity of use.
Remove light dirt and dust with a soft cloth. Dirt can be removed with damp cloth
and mild soapy water. After cleaning dry with a dry cloth!
Cleaning Notes:
 Do not use abrasive brushes or abrasive cleaners, as the paint and plastic sur-
faces can be scratched.
 Do not use sharp tools for cleaning.
(knife, metal scraper) or aggressive solvents.
 Clean all surfaces with a non-abrasive, mild detergent.
 To avoid damage to component surfaces, observe the instructions for deter-
gent use.