Technical data

Options
02/2014-v1.0en 69
8 Options
8.1 Power Input 208 / 230 V
The input voltage requirements of 208 and 230 V AC are versions for all WOODWAY
treadmills. An input power transformer for 208 V AC or 230 V AC has been installed
and connected. This does not affect the other parts of the treadmill.
8.2 Control Element in the Railing
One of the unique features of the numerous WOODWAY treadmills is the side con-
trols on the railing. By using the controls on the railing the user can adjust the
speed and/or incline it without leaning over the display. This means the user does
not have to stop running. This minimizes the risk of losing the balance and/or fall-
ing.
The control panel on the railing consists of five keys. They are as follows: STOP,
SPEED INC., SPEED DEC., ELEV. UP and ELEV. DOWN.
8.3 TV Setting, 4Front
To access the TV settings switch the TV on. Ensure that when the TV is switched on
the [ATV] wire input is selected.
Fig. 61 TV Wire Input
To ensure the TV in the correct input mode, press and hold the ENTER button. A
box with the input channel appears. The box can blink or be permanently displayed
- in any case press and hold the ENTER button until the box blinks again after about
15-20 sec.
Release the ENTER button and press the INPUT button. The setting options menu
appears. On the left side you will see the options and the corresponding settings on
the right side.