Technical data

Operation
02/2014-v1.0en 67
Pulse control
Only one of the automatic pulse types can be used during training. The user selects
his desired algorithm during program setup.
This automatic pulse program only controls the incline. The user selects the speed
themselves.
The automatic pulse - "only incline" functions as follows:
 If the actual heart rate is 80 beats per minute (BPM) below the target, the in-
cline is not adjusted. As a result proper warm-up phase is possible.
 If the actual heart rate is 26-80 BPM below the target, the incline will increase
1% after 15 seconds.
 If the actual heart rate is 6-25 BPM below the target, the incline will increase
1% after 30 seconds.
 If the actual heart rate is 3-25 BPM below the target, the incline will increase
0.5% after 30 seconds.
 If the actual heart rate is at least 3 BPM above the target, the incline will de-
crease 1% after 15 seconds.
 There is no adjustment when the actual heart rate deviates from the target by
a maximum of 2 BPM.
This automatic pulse program only controls the speed. The user selects the incline
themselves.
The automatic pulse - "only speed" functions as follows:
 If the actual heart rate is 80 beats per minute (BPM) below the target, the
speed is not adjusted. As a result proper warm-up phase is possible.
 If the actual heart rate is 26-80 BPM below the target, the speed will increase
0.64 km/h after 8 seconds.
 If the actual heart rate is 6-25 BPM below the target, the speed will increase
0.32 km/h after 15 seconds.
 If the actual heart rate is 3-5 BPM below the target, the speed will increase
0.16 km/h after 15 seconds.
 If the actual heart rate is at least 3 BPM above the target, the speed will de-
crease 0.32 km/h after 15 seconds.
 There is no adjustment when the actual heart rate deviates from the target by
a maximum of 2 BPM.
This automatic pulse program controls the incline as well as the speed.
The automatic pulse - "incline and speed" functions as follows:
 The speed is increased in increments until 80% of the user's maximum speed
is reached (calculation based on user training level input).
 The incline is increased in increments until 10% of the maximum treadmill in-
cline is reached.
 The speed is increased in increments until the user's maximum speed is
reached.
 The incline is increased until the maximum treadmill incline is reached.
 The speed and incline adjustments follow the above algorithms.
Automatic Pulse -
Only Incline
Automatic Pulse -
Only Speed
Automatic Pulse -
Incline and Speed