Technical data

Operation
02/2014-v1.0en 51
7.7.1 Description of Display Elements
The time is displayed in 00:00 format. In the user defined mode, the time is count-
ed from zero. In the program modes the time is counted down.
The speed is displayed in 00.0 format. SPEED represents the user's current speed in
kilometers per hour, or it may be used to set the user's target speed. Valid speeds
are: from 0.0 to the maximum speed (max. speeds vary depending on the model
and applicable options).
The distance is displayed in 00.00 format. DISTANCE shows the accumulated user's
distance in kilometers. The distance is accumulated until the program is terminated
or the user presses the pause button.
The calories are displayed in 0000 format. CALORIES shows the user's accumulated
burnt calories. They are calculated according to the user's weight (entered at the
beginning of the program). If the user does not enter a weight, the calories will be
calculated using a standard weight of 70 kg. The calories are accumulated until the
program is terminated or the user presses the pause button.
The time/km is displayed in 00:00 format. TIME represents the time required to run
one kilometer at the current speed.
METs is displayed in 00.0 format and represents the conversion of 3.5 milliliters of
oxygen per kilogram of body weight per minute.
The heart rate is displayed in 000 format. HEART RATE represents the user's actual
heart rate (pulse).
The incline display is used to show the user's current incline or to set the incline.
Valid incline values start at 0 and increase in steps of 0.1% to the maximum level of
incline, which varies depending on the model and the associated options.
7.7.2 Quick Start (User Defined Operation)
1. First, ensure that the treadmill is plugged into the power supply and that the
power switch (cutout in the side cover bottom right) is switched on.
2. Check that the EMERGENCY STOP MAGNET is in place.
3. To turn the display press and hold the "ON" key until the LED and LCD displays
are lit. All functions can now be operated using the mentioned surrounding
keys:
 Quick Start.
 Manual Mode (with weight entry).
 Fitness Programs.
 Fitness Tests.
Note: All specified options are located far left on the display and can be selected
there directly.
7.7.3 Quick Start Display Parameter
The time is counted from zero, the speed starts at 0.1 km/h and the distance trav-
eled and calories are accumulated. An oval 400-meter track is displayed the LCD
display. A blinking point which represents the user's position moves around the
track (counter-clockwise). In the middle of the track "Lap = 0" is displayed. Each
lap around the track represents 400 meters. The lap counter counts each completed
lap. Four laps represent a distance of 1.6 kilometers.
The number keys, CLEAR key and ENTER key are deactivated during this time.
During training in user defined mode, the user can change the incline using the in-
cline keys UP and DOWN, and the speed using the speed keys FAST and SLOW. The
user can interrupt the training at any time by pressing the PAUSE key.
TIME:
SPEED:
DISTANCE:
CALORIES:
TIME/1000m:
METS:
PULSE:
INCLINE: