Technical data

Operation
02/2014-v1.0en 41
7.2 Safety Equipment
WARNING
Dangerous situations during operation which can cause injury!
Conditions during use of the device that do not correspond to the normal
function and require an immediate stop. Each actuation of the Emergency
stop switch causes a power disconnection to the drive system which in turn
causes the running surface to emergency stop, which presents an additional
risk of falling!
► Immediate stopping of the device/drive caused by an installed safety de-
vice.
► Switching off the device (Power button) and the pulling the power cord
from the socket.
► Clarification and elimination of causes of the dangerous situations only by
WOODWAY Customer Service.
► Only restart the device after approval by WOODWAY customer service.
7.2.1 Safety Railing
The treadmill is equipped with a railing that extends along both sides and is bowed
around the front. This allows the user to maintain direct contact, so as to obtain
safety and stability during training.
For safety reasons, the user should hold on to the railing when necessary.
CAUTION
Risk of Injury Through Risk of Falling!
It is recommended to use the railing for mounting and dismounting!
7.2.2 Emergency Stop with Pull Cord
The emergency stop with pull cord is used to activate the treadmill. If the stop
switch magnet is not fixed to the front display panel or not properly positioned, the
treadmill cannot be put into operation.
WARNING
Danger of injury due to improperly installed pull cord!
If the pull cord clip is not fixed properly before a workout, the emergency
stop magnetic switch will not be triggered and there is a risk of injury in the
event of a dangerous situation.
► The use of the pull cord is mandatory!
► Securely attach clip to tight clothing (e.g. the waistband) before starting
the workout.