Technical data

Commissioning
38 02/2014-v1.0en
Fig. 39 Pro/ProXL Assembly, Connection 1
- Pull the wire and wire protection out of the side
of the railing tube and lay it along the railing
mount to the circuit board.
Fig. 40 Pro/ProXL Assembly, Connection 2
- Attach the protective conductor (green) to the
contact tab on the housing.
Fig. 41 Pro/ProXL Assembly, Connection 3
- Connect the display cable to the circuit board.
Note:
Do not connect to the marked position (X)!
Fig. 42 Pro/ProXL Assembly, Fixing the Railing 1
- Tighten railing mount bolts on the right side.