Technical data

Commissioning
36 02/2014-v1.0en
Fig. 32 Mercury/Path Assembly, Fixing the Railing
- Tighten railing mount bolts.
Fig. 33 Mercury/Path Assembly, Electronic Cover Plate
- Replace electronic cover plate on the right side
of the treadmill frame.
Fig. 34 Mercury/Path Assembly, Side Covers
- Slide the side covers on both sides and fix with
screws (do not tighten the screws yet).
Fig. 35 Mercury/Path Assembly, Cover Plates
- Slide the cover plates over the tube on both
sides and fix with screws.
Note 1:
First tighten the large screws, then the rest of the
screws.
Ensure distance between side covers and running
surface!
Note 2:
The side covers must not be in contact with the
drive belts on the rear left side!