Technical data

Commissioning
02/2014-v1.0en 35
Fig. 28 Mercury/Path Assembly, Connection 1
- Pull wire and protective cover out of the railing
tube (hole in railing tube).
Fig. 29 Mercury/Path Assembly, Connection 2
- Lay the wire with protective cover through the
hole in the console.
Fig. 30 Mercury/Path Assembly, Connection 3
- Attach the protective conductor (green) to the
contact tab on the housing.
Fig. 31 Mercury/Path Assembly, Connection 4
- Connect the display cable to the circuit board.
Note:
Do not connect to the marked position (X)!