Technical data

Commissioning
34 02/2014-v1.0en
Fig. 24 Mercury/Path Assembly, Electronic Cover Plate
- Remove electronic cover plate on the right side
of the treadmill frame.
Fig. 25 Mercury/Path Assembly, Wiring
- Insert wire and protective cover into the guard
rail tube to prevent damage during insertion.
Fig. 26 Mercury/Path Assembly, Tube Mount
- Prepare the mount for the tube. Loosen bolts if
necessary.
Fig. 27 Mercury/Path Assembly, Insert Tubes
- Insert the railing tube into the mounts.
- Do not damage the wires!
- Observe hand protection!