Technical data

Commissioning
32 02/2014-v1.0en
Fig. 17 4Front Assembly, Inserting Tubes
- Insert the railing tube into the mounts.
- Do not damage the wires!
- Observe hand protection!
Fig. 18 4Front Assembly, Connection 1
- Pull the wire and protective cover out of the
railing tube.
Fig. 19 4Front Assembly, Connection 2
- Lay the wire with protective cover behind the
railing mount.
Fig. 20 4Front Assembly, Connection 3
- Insert the plug and tighten both retaining
screws.
- Attach the protective conductor (green) to the
contact tab on the housing.