Technical data

Commissioning
28 02/2014-v1.0en
6.3.2 Desmo
Tools required for assembly:
 1 x Phillips head screwdriver, size 1.
 1 x Phillips head screwdriver, size 2.
 1 box wrench SW 13.
Fig. 4 Desmo Assembly, Inserting Tubes
- Insert the railing tube into the mounts on both
sides.
- Observe hand protection!
Fig. 5 Desmo Assembly, Wiring
- Pull the display and protective conductor wires
out of the bottom of the railing tube.
Fig. 6 Desmo Assembly, Fixing the Railing
- Tighten the railing mount bolts on both sides.