Specifications

18
The baffle in your Woodsman fire is an integral part of the appliance and helps ensure a
clean, efficient and controllable burn. However, baffles are a consumable item and are
designed to be replaced as they are likely to degrade with use due to the exposure to
the extreme heat of the fire.
The life of the baffle will depend on what is burnt in the fire and how hot the fire usually
burns.
At the risk of damaging the fire box, the baffle should be replaced as soon as it
shows signs of damage and cannot perform its intended function.
Baffles
Replacing Baffles
Replacing baffles is a simple task and can be carried out by the user.
Replacing all baffles, except Tarras (MKI)
 Remove side bricks from the fire
 Pull the old baffle out of the locater hole in the rear of the fire
 Allow the front of the baffle to drop forward and down to the bottom of the fire
 Rotate and remove through the door
 Reverse process to install new baffle
Replacing the Tarras (MKI) baffle
 Raise the front brick and position on top of the rear
 Lift the left hand side of the s/s triangular tube and pull the right hand side out of
the hole, this will release it, lower one side and remove
 The bricks are now able to be removed
 Place new bricks back in place on the ledge with the front brick on top of the rear
 Drop in new air tube
 Reposition the front brick in place on top of the new air tube
Brunner, Tasman, Aspen
(2410)
Tarras (MKI)
(FI-12295)
ECR-165, MKII, MKIII,
MKV, DVI-165
(2137)
Tarras (MKI)
(SKA-2307& SKA-2306)
Blaze, Boston, Manhattan
(BF-10993)
Tarras MKII
(BAF-12449)
Flare (Wood Only)
(FI-12671)