Technical Specifications

When ordering, specify model , inlet and wall thickness.
©2010 WOODFORD Mfg. 0609
Rev. 06/10 Form No. 30.103
The Woodford Model 30 faucet automatically drains
with or without a hose attached. The faucet is intended
for irrigation purposes and designed for residential and
light commercial outside water service applications.
The Model 30CC, Close Coupled with standard C inlet,
is designed for use in non-freeze areas and fi ts within
2” x 4” stud wall. (Optional CP or PX inlets are available
but will not fi t within 2” x 4” wall.)
Backflow Protected
Automatic Draining
Freezeless Wall Faucet
Model 30
Model 30CC
SPECIFICATIONS:
• Faucet automatically drains with or without hose
attached
• No sprayback when faucet is shut off
• All structural components made of brass
• Model 30 wall faucet is ASSE 1053 Approved.
• Attached Backfl ow Preventer features:
• ASSE 1052 Listed
• Field Testable
• Dual Check Valves
• Holds against 125 p.s.i backpressure
• No lead solder
• Oval metal handle (Tee Key available)
• Max pressure: 125 p.s.i.
• Max Temperature: 120° F
Patent Pending
CC 4 6 8 10 12 14 16 18 20 22 24
1.8 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0
*Overall Length Dimension: Add wall thickness and inlet option length
shown in chart above. Overall length for 30CC is 2 3/4”.
Shipping Weight Each
Wall Thickness (inches)
(For Non-Freeze
Areas ONLY)
C Inlet
COMBINATION
Copper Sweat Fitting
1/2” K, L or M Inside
3/4” M Only Outside
CP Inlet
COMBINATION
1/2” Male Pipe Thread
1/2” Female Sweat
CP3 Inlet
COMBINATION
3/4” Male Pipe Thread
3/4” Female Sweat
P Inlet
COMBINATION
1/2” Female Pipe Thread
3/4” Male Pipe Thread
PX Inlet
1/2” PEX Tube Fitting
PX3 Inlet
3/4” PEX Tube Fitting
Inlet Descriptions
• Optional WF-30MS Mounting Sleeve. See website
for details.
For Installation Instructions go to
www.woodfordmfg.com or call 1-800-621-6032
Rough-In Dimensions
INLET
SEE
WALL THICKNESS
(30CC = 2 3/4")
OVERALL LENGTH
ALIGNING MARK
U
P
C
C
R
U
P
C
R
R