Technical Specifications
Anti-Siphon
Automatic Draining
Freezeless Wall Faucet
Model 25
The Model 25 faucet drains as handle is shut off
even if hose is attached
. This faucet is designed for
residential outside water service applications.
SPECIFICATIONS:
MODEL 25 - Approved under ASSE Standard 1019-
B and listed by IAPMO . Meets Government
Specification WW -541b Type 205.
VACUUM BREAKER – ANTI-SIPHON - NIDEL
Model 34HA with ¾ inch male hose thread.
Approved under ASSE Standard 1011, Canadian
Standards Association and listed by IAPMO .
EXTERIOR FINISH - Brass
VALVE – Molded Nitrile suitable for hot water.
NO LEAD SOLDER - All solder joints.
PLUNGER – Hemispherical cushion type.
STEM SCREW – DELRIN
HEAD NUT – Brass
HANDLE – Metal. (Optional Tee Key)
INLETS – As shown.
MAX PRESSURE – 125 p.s.i.
MAX TEMPERATURE - 120 F
79
07
WOODFORD MFG. CO.
15
p
VALVES
79
07
VALVES - freezeless
WOODFORD MFG. CO.
15
p
WOODFORD
When ordering, specify model number, inlet, and wall thickness.
©2004 WOODFORD Mfg.
Rev. 03/04 Form No. 25.104
Wall Thickness
4 6 8 10 12 14 16 18 20 22 24
Shipping Wt.
20 21 22 23 24 25 27 29 31 33 35
Approx. Shipping Weight (lbs.) per master carton of ten faucets.
*Overall Length Dimension: Add wall thickness and inlet option
length shown in chart at the right.
NOTICE - To close and drain, turn handle
clockwise until seated and water drains out of
drain hole or faucet may freeze and burst. Vacuum
Breaker replacement is recommended every 3-5
years
*OVERALL LENGTH
SEE
INLET
WALL
THICKNESS
ALIGNING MARK
Rough-In Dimensions
P Inlet
COMBINATION
1/2” Female Pipe Thread
3/4” Male Pipe Thread
C Inlet
COMBINATION
Copper Sweat Fitting
1/2” K, L or M Inside
3/4” M Only Outside
CP3 Inlet
COMBINATION
3/4” Male Pipe Thread
3/4” Female Sweat
CP Inlet
COMBINATION
1/2” Male Pipe Thread
1/2” Female Sweat
PX Inlet
1/2” PEX Tube Fitting
1 3/4
15/16
Inlet Descriptions
1 5/8
15/16
1 7/8
1 1/16
1 7/8
1 1/16
1 3/4
15/16