Installation Guide

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
www.woodbridgebath.com
R
WOODBRIDGE
13
W
o
od
Fig5
a.
b.
c.
16
14
Door end of guide rail
High spot of Adjustment Disk bushing
Glass-to-Rail Bracket
Adjustment disk
16
The outer Glass-to-Rail Bracket (#16) disk has an
eccentric bushing for adjustment. Be sure to install both
Glass-to-Rail Bracket disks with the high spot of the
bushing pointed towards the door end of the guide rail.
5. Loose the screws on the Glass Bracket (16),
align the hole of the Glass Bracket to the holes
on the Stationary Glass (14). Secure the Upper
Guide Rail (4) to the Stationary Glass by
fastening the screws on the Glass Bracket.
Please see Fig 5 for details.
ATTENTION:
Never set your glass down directly onto a tile or concrete floor. Always use a piece of wood or cardboard and leave the corner pads on the glass
until it becomes necessary to remove them to protect the bottom edge and the corners of the glass from breakage.