Installation Guide

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
www.woodbridgebath.com
R
WOODBRIDGE
MUST ALLOW SILICONE TO DRY FOR 24 HOURS BEFORE STARTING USING THE SHOWER
Thank you for using WoodBridge products!
Please don't hesitate to contact us if you have any quesons or concerns.
20
Glass door down
Glass door up
1.
2.
3.
4.
Figure 16
Figure 17
1/24"
1/24"
16. Apply clear silicone sealant between
the threshold and shower tray or shower
base. Also, apply silicone between the
wall and the fixed glass.
WAIT 24 HOURS BEFORE USING THE
SHOWER ENCLOSURE
See
Figure 17 for details.
15. Install the Safety Pin (17) to the Glass Door (4). The roller is off-centre, adjust the roller to make the
glass door move higher or lower and make sure that the glass door will not rub against the Guide Block
(10) and ensure the bumper strip to push against the wall.
See
Figure 16 for details.
TUB DOORS INSTALLATION the
same as SHOWER DOORS
Customer Service Phone: [phone]. (Monday - Friday 9 AM - 5 PM Pacific Time)
Or Email: [e-mail]