WOODBRIDGE R INSTALLATION INSTRUCTIONS SHOWER DOORS • TUB DOORS MODELS: SHOWER DOORS: MSDF4876 MSDE6076 TUB DOORS: MSDE6062 Customer Service Phone: 562-229-0088. (Monday - Friday 9 AM - 5 PM Pacific Time) Or Email: help.woodbridge@gmail.com 0119328 REV. 2 www.woodbridgebath.
WOODBRIDGE R PREPARATION 1. WE STRONGLY RECOMMEND THAT A LICENSED AND INSURED PROFESSIONAL CONTRACTOR TO INSTALL THIS PRODUCT INCLUDING THE ASSISTANCE OF A SECOND PERSON DURING INSTALLATION. 2. After opening all boxes and packages, read this introduction carefully. Check that all of the needed parts are included in the package by marking all the components on the "Detailed Diagram of Shower Door Components". Examine boxes and packages for shipping damage.
WOODBRIDGE R H W Threshold Requirement (Size): 2 1/4" www.woodbridgebath.
WOODBRIDGE R 16 15 17 18 14 19 20 1 2 13 Fixed Glass 3 Glass Door 4 12 5 10 6 11 21 5mm 4mm 8 3mm 2.5mm 2mm 7 9 No. Description QTY No.
WOODBRIDGE R 1. Your Upper Guide Rail (15) and Anti-Splash Aluminum Threshold (9) have been precut for your shower model opening width: 48" or 60". If W-width of your wall to wall opening is equal to the size of your shower model, it is not necessary to cut the guide rail and threshold and you can continue to step 2.
WOODBRIDGE R 1. W Figure 2 3. 2. S W L www.woodbridgebath.
WOODBRIDGE R 2. Place the Anti-Splash Aluminum Threshold (9) to the shower tray or shower base. Using a level to adjust the threshold horizontal, make sure the threshold level. See Figure 3 for details. 9 Figure 3 1. 2. 9 www.woodbridgebath.
WOODBRIDGE R 3. Make the marks through the Anti-Splash Aluminum Threshold (9) for drilling. Now drill the holes with drill bit Φ8mm(Ø5/16"), and Apply silicone into the holes on the wall. Insert the Wall Anchor (7). See Figure 4 for details. 9 1. Drill bit 8mm(ø5/16") Figure 4 9 2. 3. 8mm(ø5/16") www.woodbridgebath.
WOODBRIDGE R 4. Apply silicone from top to bottom along the back edge (edge facing the shower base) of Anti-splash Aluminum Threshold (9).Fasten the threshold to the shower base or shower tray with Round Head Screw M4X30 (6). Put the Screw Cover (5) to cover the screw in the threshold. Put the Glass Bracket to Anti-splash Aluminum Threshold. See Figure 5 for details. Figure 5 1. 2. back edge 6 9 9 3. 20 11 6 9 9 www.woodbridgebath.
WOODBRIDGE R 5. Use the allen key (21) to loose the screw on the guide rail bracket (20) and glass door stopper (19). Slide the stopper and then the bracket to the guide rail (15). See Figure 6 for details. 19 19 20 20 15 6" 4" 1. 2. 19 20 4. 3. 20 19 15 19 15 Figure 6 www.woodbridgebath.
WOODBRIDGE R 6. Loose the screw of the Glass Bracket (14) and then align the screw hole of the glass bracket with the hole of the Fixed Glass (13), fasten the fixed glass with to Guide Rail (15). See Figure 7 for details. 1. 3. 2. 14 1. 14 7 2. 14 13 3. 14 Figure 7 www.woodbridgebath.
WOODBRIDGE R 7. Put the Fixed Glass Assembly with the Guide Rail (15) into the slot of the Anti-Splash Aluminum Threshold (9). See Figure 8 for details. Figure 8 1. 2. Inside Wall 13 13 3. 4. Outside 13 13 Outside Inside 9 9 shower tray or shower base www.woodbridgebath.
WOODBRIDGE R 1. 2. 3. 8. Now, level your Upper Guide Rail(15) and tighten up the Glass Bracket (14) and Fixed Glass (13) with Alleny Key(21). See Figure 9 for details. Figure 9 www.woodbridgebath.
WOODBRIDGE R 1. Outside 2. 3. 20A 20 20A Inside 20B 4. 5. 6. 20A ø8 9. Align the Upper Guide Rail (15) and make it horizontal, and then slide the Guide Rail Bracket (20) to attach to the wall. Outline the position of the guide rail bracket on the wall. Put the fixed glass assy away and remove the guide rail bracket from the upper guide rail by loosing the screw on it, and then place the Wall Bracket (20A) of the guide rail bracket on the outlined position and mark down the holes for drilling.
WOODBRIDGE R 1. Wall 2. 13 13 3. 4. 13 20A 9 20B 5. 20B 10. Put the Fixed Glass Assembly into the Anti-Splash Aluminum Threhold (9) again, now slide the guide rail brackets toward the wall and push it against the wall. Use Allen Key (21) to tighten up the screws of the brackets. Slide the Side PVC Strip(12) into the slot of the threshold, between the Fixed Glass (13) and the threshold. See Figure 11 for details. 20A Figure 11 www.woodbridgebath.
WOODBRIDGE R 8. 12 Outside 12 13 13 12 12 9 9 shower tray shower base www.woodbridgebath.
WOODBRIDGE R 1. 2. 1 3/16" 4. 3. 3.2mm(ø1/8") Figure 12 11. Place the Guide Block (10) on the shower base or shower tray and parallel it to the Fixed Glass (13). It should not pass beyond the vertical edge of the glass. Take a measurement to ensure the distance between the front line of the glass and the center line of the Guide block is 1 3/16". Hold the guide block firmly and mark down the drilling hole on the shower base or shower tray.
WOODBRIDGE R 12. Slide the Side Anti-water Strip (16) to the Fixed Glass (13), remove the flapper that interferes with the Guide Rail (15). 1. 13 See Figure 13 for details. Outside 16 13 16 Inside 2. Outside 13 16 Inside Figure 13 4 13. Install the Handle (3) and Rollers (18) to the Glass Door (4), place Anti-Water Strip (16) and Bumper Strip (1) to the glass door as well. Remember to remove the flapper that interferes with the Guide Rail (15). 11 See Figure 14 for details. 1. 18 4. 3.
WOODBRIDGE R 14. Hang the Glass Door Assembly to the Guide Rail (15), make sure that the Rollers (18) are against the guide rail, now adjust the Glass Door (4) and slide the bottom edge of the glass door into the groove of the Guide Block (10). See Figure 15 for details. 6. 4 13 4 10 15 3 4 4 Wall 13 4 15 Figure 15 www.woodbridgebath.
WOODBRIDGE R 2. 1. 4. 3. 1/24" 1/24" Glass door down Glass door up Figure 16 15. Install the Safety Pin (17) to the Glass Door (4). The roller is off-centre, adjust the roller to make the glass door move higher or lower and make sure that the glass door will not rub against the Guide Block (10) and ensure the bumper strip to push against the wall. See Figure 16 for details. Figure 17 16. Apply clear silicone sealant between the threshold and shower tray or shower base.
WOODBRIDGE R NOTES INSTALLER INFORMATION DATE OF INSTALL: INSTALLER’S NAME: PLUMBER: CONTRACTOR: LICENSE #: www.woodbridgebath.
