Installation Guide

2
Do not place the product in a location exposed to direct sunlight as this
will shorten the life of the electronic components.
Avoid placing other objects within a distance of at least (5”) below
infrared sensor or mirror objects facing the sensor within a distance of
(9.8”) , so that performance is not impaired.
Only for indoor use. Avoid exposing the product to rain or moisture.
Never immerse the product in water or other liquid.
Avoid direct exposure to sunlight and keep away from heat sources.
The device may not operate normally otherwise.
Do not use any sharp items to damage the product as this may crush
and cause injury.
Do not attempt to disassemble the product for any kind of repairs.
This is to prevent damage to the product and it also voids the warranty.
Do not place the product in very cold (under -5℃) or very hot (over
40℃) environments as this may cause the device not to operate
normally.
Do not insert pins, iron wires or other objects into product holes.
Do not move, shake or tilt the product during operation.
Do not place the product in unstable or humid places.
Keep a distance from the heating area when the defogger in operation,
to avoid burns.
Caution
Do not try to disassemble the device. The disassembly of the device by
unauthorized personnel may damage the device. And will also void the
device warranty.
Do not handle the electrical plug with wet hands.
Never operate this product if it has a damaged cord or plug. Call for
professional service.
The product should be used with a grounded socket rated at lease 15A.
Do not other electric appliances in the same socket.
The plug should be fully inserted to socket.
Warning