Installation Guide

9
Mark the locations of mounting bars (determining
the center point) and screws.
Installation
1
Drill installation holes at the marked locations,
and insert the wall anchor where needed.
2
Fix the mounting bar with screws.3 Put the cabinet on the mounting bar and connect
to hook properly.
4
Fix the bracket with screws.
6
If needed, align the door.8Insert the clips into the side holes and fit the
shelves into the clips.
7
Slide two brackets into the grooves at the bottom
of cabinet. Mark the installation locations, drill
holes and insert the wall anchor.
5
Recommended
height:
1900-1950mm
to ground