INSTALLATION AND OPERATION GUIDE LED MEDICINE CABINET Model: MCL2430 Model: MCL3630 Model: MCL4830 Thank you for choosing our products.Please read the instructions carefully before installation and keep it available for future maintenance or reference. Please don’t hesitated to contact us if you have questions or concerns. Customer Service Phone: 562-229-0088 (Monday – Friday 9AM – 5PM Pacific Standard Time) 20220106 REV.
Content Safety Instructions 1 Parts identification 3 Technical Specification 6 Using the Mirrored Cabinet 7 Before Installation 8 Tools and Materials 8 Dimensions 8 Installation 9
Safety Instructions Please read the instructions carefully before installation and keep it available for future maintenance or reference. Failure to observe this instruction can cause body injury and property damage. Explanation of symbols Warning Refers to an immediately dangerous situation that will cause serious injury or death. Caution Refers to a potentially dangerous situation that may cause slight or moderate injury or property damage.
Warning Do not try to disassemble the device. The disassembly of the device by unauthorized personnel may damage the device. And will also void the device warranty. Do not handle the electrical plug with wet hands. Never operate this product if it has a damaged cord or plug. Call for professional service. The product should be used with a grounded socket rated at lease 15A. Do not other electric appliances in the same socket. The plug should be fully inserted to socket.
Parts identification MCL2430 (24 inches) Defogger Heating Area Sensor Light Temperedglass Shelf Wire Outlet Socket/USB Port Sensor Light Mirror Light Sensor Switch Accessories List Glass Shelf*2 564.4*110*6mm (22.2’’x4.33’’x0.24’’) Mounting Bar*1 Mounting Bracket*2 INSTALLATION AND OPERATION GUIDE LED MEDICINE CABINET Model: MCL2430 Model: MCL3630 Model: MCL4830 Thank you for choosing our products.
Parts identification MCL3630（36 inches） Tempered-glass Shelf Wire Outlet Mirror Light Sensor Switch Defogger Heating Area UV Sterilization Module Socket/USB Port Sensor Light Sensor Light UV Sterilization Sensor Switch Accessories List Glass Shelf (left)*2 564.4*110*6mm (22.2’’x4.33’’x0.24’’) Glass Shelf (right)* 2 284*110*6mm (11.18’’x4.33’’x0.
Parts identification MCL4830 （48 inches） Tempered-glass Shelf UV Sterilization Module Wire Outlet Mirror Light Sensor Switch Socket/USB Port Defogger Heating Area Sensor Light Sensor Light UV Sterilization Sensor Switch Accessories List Glass Shelf (middle)*2 564.4*110*6mm (22.2’’x4.33’’x0.24’’) Glass Shelf *4 284*110*6mm (11.18’’x4.33’’x0.
Technical Specification Rated voltage 120V Rated frequency 60Hz Ambient temperature Power cord length Rated voltage Max power Lighting ※ UV sterilization lamp Defogger (electrical heating) Socket -5℃ ～ 40℃ (23F～104F) About 1.3m (51.2’’) DC 24V 7.
Using the Mirrored Cabinet 1 Turning the device on/off 1. Insert the leakage protection plug into a power socket, press the reset switch, plug indicator lights up, indicating that the power is on. 2. Turn on power to enter standby mode, and off to shutdown mode. Note: Press the test button prior to usage, the reset switch pops up indicating that the leakage protection function is normal.
Before Installation WARNING: Risk of electric shock. Disconnect power before installation. WARNING: Risk of electric shock. Connect only to a properly-grounded , grounding-type receptacle which is supplied by a 120~, 60Hz power and protected by Residual Current Device (RCD). It is important to identify the type of wall where the medicine cabinet will be installed and prepare the installation location accordingly.
Installation 1 Mark the locations of mounting bars (determining the center point) and screws. 2 Drill installation holes at the marked locations, and insert the wall anchor where needed. Recommended height: 1900-1950mm to ground 3 Fix the mounting bar with screws. 4 Put the cabinet on the mounting bar and connect 5 Slide two brackets into the grooves at the bottom 6 Fix the bracket with screws. 7 Insert the clips into the side holes and fit the 8 If needed, align the door. of cabinet.
Please don’t hesitated to contact us if you have ques�ons or concerns. Customer Service Phone: 562-229-0088 (Monday – Friday 9AM – 5PM Pacific Standard Time) ASUFA63040000A-1.
