Installation Guide

1 of 2

Diagram 2

NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND

TIGHTENED PROPERLY AND SECURELY.

Diagram 1

Ridgeview Coffee Table

RXST-405CT

Assembly Instructions

Step 1: Remove protective wrapping first. Then lay all parts on floor and identify all parts packed

in carton against attached parts list.

Step 2: Lay tabletop (A) upside down on floor, so bottom is facing up. Place a protective soft

material on floor before placing tabletop of table face down on floor to avoid scratching.

Step 3: Then attach each of four legs (B) to the bottom as shown in Diagram 1, using Short Bolt(D)

and Washer (F) and Bolt cover(G). Attach Stretcher (C) to Leg (B) using Long Bolt (E) and Washer

(F) and Bolt Cover (G) as shown in Diagram 2.

Step 4: Make sure all bolts are aligned properly and tightened. Then place bolt covers over bolts.

Turn the table over onto it's legs carefully resting it on flat floor surface as shown in Diagram 3.

PAGE 1
Ridgeview Coffee Table RXST-405CT Assembly Instructions Step 1: Remove protective wrapping first. Then lay all parts on floor and identify all parts packed in carton against attached parts list. Step 2: Lay tabletop (A) upside down on floor, so bottom is facing up. Place a protective soft material on floor before placing tabletop of table face down on floor to avoid scratching.
PAGE 2
Diagram 3 PARTS LIST Ref Part Name Part Image Qty Ref Part Name Part Image Qty A Table Top 1 E Bolt(Long) 8 B Leg 4 F Washer(M6) 12 C Stretcher 1 G Bolt Cover 12 D Bolt(Short) 4 H Hex wrench 1 WOODARD Customer Service Hours 8:00am-5:00pm CST Monday to Friday Phone: (800) 877-2290 Fax: (800) 733-4257 PRINTED IN CHINA 2 of 2