Specifications

An ongoing program of product improvement may require us to change

speciﬁcations without notice. WS-MS-(4, 5, 6, 7)-W-IR,

Revised May 2015. Doc no: M0036.04

Mountain Series

Installation and Operation Manual

info@woodstone-corp.com or visit woodstone-corp.com

wood stone corporation

1801 w. bakerview rd.

bellingham, wa 98226 usa

tf. 800.988.8103

t. 360.650.1111

f. 360.650.1166

GAS SPECIFICATIONS

Model SV-1

WS-MS-4-W-IR-NG 3�5"

WS-MS-5-W-IR-NG 3�5"

WS-MS-6-W-IR-NG 3�5"

WS-MS-7-W-IR-NG 3�5"

Model SV-1

WS-MS-4-W-IR-LP 9"

WS-MS-5-W-IR-LP 9"

WS-MS-6-W-IR-LP 9"

WS-MS-7-W-IR-LP

9�2"

Model SV-1

WS-MS-4-W-IR-HLP 9"

WS-MS-5-W-IR-HLP 9"

WS-MS-6-W-IR-HLP 9"

WS-MS-7-W-IR-HLP

9�2"

The Wood Stone Gas ovens are equipped with a 3/4" NPT gas connection located at the rear left of the oven� Have a

licensed gas installer provide the hook-up and test all ﬁttings and pipe connections for leaks� Use approved gas leak

detectors (soap solutions or equivalent) over and around the ﬁttings and pipe connections� DO NOT USE FLAME TO

TEST FOR LEAKS!

SV-1 is the gas control valve that operates the Underﬂoor Infrared (IR) burner� The manifold pressure test port is 1/8: NPT

pugged tap located on the IR burner manifold�

The burner manifold pressure has been adjusted and tested at the factory� A variety of factors can inﬂuence this pressure,

so be sure to test the burner manifold pressure and adjust the valve as necessary to achieve the speciﬁed pressure�

NOTE: Maximum inlet gas pressure: 1/2 psi (14 inches W.C.)

This oven requires no modiﬁcations or adjustments for use at high altitudes.

Factory speciﬁed individual burner manifold pressures (W.C.) for W-IR models equipped to burn wood and

Natural Gas (NG)

Factory speciﬁed individual burner manifold pressures (W.C.) for models equipped to burn wood and

Propane (LP & HLP)