User Manual

Rev 9.0/7-13 3 PF-DCO-DVS: #35132
SPECIFICATIONS
Model Number:
6 Vacuum Pads
8 Vacuum Pads
Vertical Configuration:
PFV69DCO
--
Horizontal / Small Configuration:
PFHS69DCO
PFHS89DCO
Horizontal / Large Configuration:
PFHL69DCO
PFHL89DCO
Maximum Pad Spread: (to outer edges)
Vertical Configuration:
57¼" x 46¼" [1451 x 1172 mm]
--
Horizontal / Small Configuration:
37¼" x 46¼" [943 x 1172 mm]
39¼" x 47" [994 x 1197 mm]
Horizontal / Large Configuration:
46¼" x 57¼" [1172 x 1451 mm]
39¼" x 59½" [994 x 1513 mm]
Lifter Weight: (for larger configurations)
86 lbs [39 kg]
124 lbs [57 kg]
Load Capacity: (rated at 16" Hg [-54 kPa] on clean, smooth, nonporous flat surfaces
1
)
Per-Pad:
125 lbs [56.5 kg]
125 lbs [57 kg]
Maximum:
700 lbs [320 kg]
1000 lbs [455 kg]
Description:
Power Source:
Battery Capacity:
Vacuum Pads:
Rotation Capability:
Tilt Capability:
Vacuum Pump:
Vacuum Reserve Tanks:
Vacuum Gauges:
Low Vacuum Warning Light: Red light is energized until vacuum level is sufficient to lift maximum load weight (higher than
16" Hg [-54 kPa]) and whenever vacuum loss causes pump to re-engage.
Low Vacuum Warning Buzzer: Maximum Alarm Volume = 103 dBA at 2 ft [60 cm]. While the lifter is powered up, an
audible alarm warns the operator whenever vacuum is not sufficient for lifting the maximum load
weight.
Options:
Operating Elevation:
Operating Temperatures:
Service Life:
ASME Standard BTH-1:
!!-CE-!! Note: This symbol appears in the
INSTRUCTIONS
manual only when requirements of a CE Standard are
different
from requirements of other standards that also apply to this vacuum lifter. CE requirements are
mandatory in geographical areas where CE Standards apply, but may be optional in other locations.
1
Load Capacity is based on a friction coefficient of 1; see MAINTENANCE: VACUUM PAD MAINTENANCE: Friction Coefficient for
additional information.