KEEP FOR FUTURE REFERENCE INSTRUCTIONS P.O.
SPECIFICATIONS Model Number: EO2GSL Description: A green indicator light is operative while the main power switch is in the ON position ( ). A vacuum switch energizes the lift light whenever the lifter’s vacuum is higher than the minimum level specified for Maximum Load Capacity (see SPECIFICATIONS in lifter's instruction manual).
INSTALLATION 1) Remove the Vacuum Lift Light from its protective packaging. 2) Follow the vacuum lifter's instruction manual to verify that the lifter is in good working order before installing the lift light. 3) Remove the existing power switch enclosure and disconnect the wiring. Then mount the new enclosure on the lifter and connect the wiring, using the appropriate wiring diagram (provided).
OPERATION Using the Vacuum Lift Light requires minimal interaction from the operator. Operate the vacuum lifter as directed in the OPERATION section of the lifter's instruction manual. After all vacuum pads seal securely against the load and the lifter attains the vacuum level required for the Maximum Load Capacity (see SPECIFICATIONS in lifter's instruction manual), the lift light turns on to indicate that the lifter is ready to lift the maximum load weight.
VACUUM SWITCH ADJUSTMENT Vacuum Switch Function A vacuum switch controls the vacuum lift light for an AC lifter (see OPERATING FEATURES for location of vacuum switch). After the lifter attains a vacuum level sufficient for lifting the maximum load weight (hereafter, “minimum lifting level”), the vacuum switch automatically turns on the lift light.
REPLACEMENT PARTS LIST Stock No. Description Qty. 64289 Bulb - 24 V - Bayonet (for 24 V light) 1 64284 Bulb - 6.3 V - Bayonet (for 120 V and 240 V lights) 1 64262 Green Light Lens 1 64236 Vacuum Switch 1 SERVICE ONLY WITH IDENTICAL REPLACEMENT PARTS SUPPLIED BY OR APPROVED BY WOOD'S POWR-GRIP CO., INC. Rev 1.
LIMITED WARRANTY Powr-Grip products are carefully constructed, thoroughly inspected at various stages of production, and individually tested. They are warranted to be free from defects in workmanship and materials for a period of one year from the date of purchase. If a problem develops during the warranty period, follow the instructions hereafter to obtain warranty service. If inspection shows that the problem is due to defective workmanship or materials, Powr-Grip will repair the product without charge.
Rev 1.
Rev 1.
