Operating instructions

1892 1335 - Orion Radio Modem Operating Instructions - v2.9 / Aug 2009 65
Leading zeros and the plus sign for positive values may be entered or omitted. Thus these
strings are considered valid entries for a parameter shown as xxx:
1
01
001
+1
+01
+001
whereas 0001 is not (too many places).
Where a number of places are shown after a decimal point, the decimal point must be
entered, but no leading zero is required before the point, and not all the trailing spaces need
be filled. Thus these strings are some of the acceptable entries for a parameter shown as
xxx.xxxxxx:
0.0625
0.062500
.0625
.062500
+.0625
whereas 000062500 is not (missing decimal point).
Where several parameters are shown to a command, they must all be entered, separated by
commas. No parameter may be omitted by placing two commas together.
No spaces may be included anywhere in the command string: the equals sign is followed
immediately by a parameter if required, and where there are multiple parameters, they are
separated by commas only.
Ending Command Mode (ATO)
v Before ending Command Mode, make sure that you save any changes you wish
to keep by issuing the AT&W command.
Command Mode is ended by inputting the string
ATO<enter> (Capital letter O, not zero)
The unit responds with
OK<CR><LF>