Operating instructions

44 1892 1335 - Orion Radio Modem Operating Instructions - v2.9 / Aug 2009
CONFIGURATION MANAGEMENT
Configuration management is carried out using menu commands. Editing of individual
parameters is carried out in the main area of the GUI.
File Menu - load and save configurations to disk
v Any parameters currently being edited in the GUI are overwritten when a
configuration is loaded.
Load User Parameters
Load user parameters from a file into the GUI editing window. Level2 and Radio parameters
are not loaded as these are password protected.
Load User Parameters + Level2 Parameters
Level 2 Password protected.
Load user and Level2 parameters from a file into the GUI editing window. Radio parameters
are not loaded.
Load all Parameters
Radio Password protected.
Load all parameters from a file into the GUI editing window.
Save Parameters
Save the parameters currently being edited in the GUI to a new or existing file.
Link Menu - load and save configurations to and from an Orion unit
v Any parameters currently being edited in the GUI are overwritten when a
configuration is loaded.
Read Local Parameters
Load all parameters (including passworded) from the Orion EEPROM memory to the GUI
editing window.
Write Local Parameters
Write all parameters (including passworded) from the GUI editing window to the Orion
EEPROM (working) memory and its non-volatile FLASH memory. Progress is reported on-
screen, and the configuration is read back for verification.
v This needs to be done before any changes in the GUI window become
operative in the Orion.