User guide

34 1892 1139 - RSX Range of Intelligent Modems User Guide - v7.1 / Nov 2007
Help
About Displays information about Wood & Douglas,
including website and contact details.
Check for GUI Update Checks the Wood & Douglas website for updates
and offers to update your GUI if appropriate.
Main Menu - Frequency Table (Inner Window)
Channel Table
The Channel Table shows the following parameters for each of the 80 or 256 channels, as
appropriate:
Channel No Parallel (logic lines) code required to select this
channel, where 1 represents a connection to 0v,
closed contact to 0V or logic low.
Tx Frequency The transmit frequency.
Rx Frequency The receive frequency (which may be different if an
Rx offset has been selected).
Rx Offset The amount by which the Rx frequency is higher
than the Tx frequency.
Unit Information
This box is display only and cannot be edited.
File Name The name of the firmware running in the unit.
File Version The version of firmware running in the unit.
File Date The date of the firmware running in the unit
S/N The serial number of the unit.
Number of Channels How many channels are programmed and may be
selected during operation.
Maximum Frequency The software assumes a 5MHz switching bandwidth
to calculate the Maximum Frequency from the
Minimum Frequency and uses this to calculate the
frequencies in the drop-down list displayed when
selecting channel frequencies.