User guide

32 1892 1139 - RSX Range of Intelligent Modems User Guide - v7.1 / Nov 2007
APPENDIX: SXn50 RADIO PROGRAMMING SOFTWARE REFERENCE
Top Level Menu Bar (Outer Window)
File
Load Parameters Load a pre-stored set of parameters in a *.WXP file
from a standard File Open dialog.
Save Parameters Save the current set of parameters, overwriting the
previous ones.
Save Parameters As Save the current set of parameters under a new
name. A default name is given which you can
change, and you can navigate to the directory of
your choice.
Saving Options Controls the format in which information is saved.
Provided you are programming an SXn50G, you
should save in the default Format 2, allowing 80
channels with IF offsets. Format 1 is only used with
legacy SX450 modules.
Save Report File Save the current report. A default name is given
which you can change, and you can navigate to the
directory of your choice.
Print Print the current set of parameters; only available
when Report File window is open. The currently
selected Windows default printer will be used.
Update Firmware Replace the firmware in a unit with a binary file
selected from a standard File Open dialog.
Caution: This can render a unit unusable and
require repairs by Wood & Douglas if done
incorrectly.
Exit Program Exit the program.
Parameters
Reference Osc Fixed in hardware, display only.
Comparison Frequency Fixed in hardware, display only.
Channel Step Size Multiple of the Comparison Frequency
Number of Channels 80 (individually programmed) or 256 (programmed
as a table)