Operating instructions

4 1892 1236 - SX500 Transmitter Operator Note - v1.6.1 / Apr 2005
INSTALLATION
Figure 1 SX500 Outline Drawing
CONNECTION
Connection to the SX500 transceiver is via PL1, PL2 and PL3 which plug directly into the
user's own equipment. The location of these connectors is shown in Figure 1 and detailed
in the following tables.
PL1 PIN NAME FUNCTION REMARKS
1 0V 0 volts common ground
2 RF O/P RF output 50 ohms output
3 0V 0 volts common ground
Table 2 PL1 Pin Connections
PL2 PIN NAME FUNCTION REMARKS
1 +VRAW DC Supply Input 5.5 - 15V DC input
2 0V 0 volts common ground
Table 3 PL2 Pin Connections