Manual

Inc.Allrightsreserved. www.wooaudio.com Rev1.0.June27,2011 13



The LED and the tubes do not light.

First check if the AC cord is installed. Then, check if the fuse is burnt. See the following

instruction on how to replace a fuse. The fuse type is 2-3A, slo-blo.



Insert a small flat

screwdriver into

the fuse door

which located on

the AC inlet.

Release the fuse

door by pulling it

out.

The fuse holder is

released from the

AC inlet.

The fuse is held by

a clip

