User's Manual

HX-P460
HEY THERE!
Thank you for purchasing the JAM
TRANCE MINI. Check out the
sections below for all the important
information about your new Speaker.
WE’RE HERE TO HELP. CONTACT US!
USER GUIDE AND
WARRANTY INFORMATION
TRANCE MINI
You’ve got questions? We’ve got answers.
Contact a Customer Relations representative by phone or email to
help answer any questions. Please be sure to have the model
number of your product available. (Hint: It’s HX-P460)
Register your Speaker! Information about where you bought it
and how you’re using it is like gold for the people who make these
speakers.
US: www.jamaudio.com/customer-support/product-registration
CAN: www.Canada.jamaudio.com/customer-support-canada
1. The cord that came with the speaker– the one with the USB on
one end and the Micro USB on the other – will work with your
computer.
2. IF you want to use the wall outlet, you’ll need to pick up a
power cord with a Micro USB the next time you’re at the store,
or use any USB AC adaptor, including the one for your cell.
JUST CHARGE IT
Charging the speaker is so easy you’ve probably figured it out by now, but in case you’ve got two options, you can charge it using your computer or a
wall outlet. The Jam Trance Mini needs about 3 hours for up to 5 hours of party time.
SHED SOME LIGHT
CONTROL YOUR DESTINY… OR AT LEAST YOUR SPEAKER
1. Power, press and hold for 3 seconds to power on. Let’s you
know Bluetooth is paired, & charging
2. Color selector button. Move through 7 different light programs
3. Program selector button. Move through 6 different light shows
4. Light intensity button. Control the brightness of your light show
5. Press < 0.5s Volume down. Press >3s Previous Track
6. Play/pause. Answer/hang up
7. Press <0.5 Volume up. Press >3s Next track
8. Power cord goes here
9. Here’s where you hook it up old school
Jam Trance M…
2
3
4
6
1
5
Swtich to show ¾
angle with left side of
unit to show aux-in
port and charging
port
[e-mail]
®
3h
Powering
Mode
Connected
Pairing
mode
Low
Battery
BLUETOOTH® CONNECTION – IT’S A SET UP
Like any amazing couple, this one starts with a connection – one between your
device and the speaker’s Bluetooth. Here’s how it works:
1. Make sure the smartphone, tablet or computer you’re using with the
Speaker has Bluetooth.
2. Turn on the Speaker and look for the little blinking light.
3. Do whatever your device your device needs to do on its end.
4. Look for Jam Trance Mini in your device’s Bluetooth list or click YES.
5. Now hit PLAY on your Speaker and crank it up – or down if you’re lame.
The device and Bluetooth will find each other every time just as long as the
speaker is set to Bluetooth and your device’s Bluetooth is, you know – on.
If you’re connecting to a computer, you may have some extra steps on that end.
You’ll have to get that information from the computer company.
Depending on your device you may be prompted to enter a pairing code. If
prompted enter “0000” as the code.
Press and hold PLAY/PAUSE for 3 seconds to activate pairing mode.
7
8
9