User's Manual

4 5
SETTING CLOCK TIME
MANUALLY SETTING THE CLOCK (FIGS. 1 & 2)
1. Make sure the CHILL is plugged in, but powered off.
2. Press and hold the TIME SET button located on the back of the unit to enter Time
Setting mode. The hour will begin flashing. Use the TUNER buttons to adjust
the hour, paying attention to the AM and PM indicators.
3. Once the hour has been set press the TIME SET button again and the minute will
begin flashing. Use the TUNER buttons to adjust the minute.
4. Press the TIME SET button again to set the year, month, day of the week and 12/24
mode repeating the steps above.
SETTING AND USING THE ALARMS
SETTING ALARM 1 OR ALARM 2 (FIGS. 1 & 2)
1. Make sure the unit is plugged in, but powered off.
2. Press and hold the desired alarm button (ALARM 1 or ALARM 2) located on the top of
the CHILL. The hour will begin flashing.
3. Use the TUNER buttons on top of the CHILL to adjust the hour, paying attention
to the AM and PM indicators.
4. Press the alarm button again and the minute will begin flashing. Use the TUNER
buttons again to adjust the minute.
5. Press alarm button again to adjust the maximum volume of the gradual wake feature
(alarm begins soft and slowly gets louder) by using the TUNER buttons to adjust
the sound level up or down.
6. Press the alarm button again and use the TUNER buttons to select
EVERYDAY (7), WEEKDAYS (5), WEEKENDS (2) or ONE DAY (1) settings.
7. Press the alarm button again to select the source. The CHILL’s alarm can be set to
Beep or to FM radio using the TUNER buttons. The alarm cannot be set to the
Bluetooth
®
source.
8. Press the alarm button again to exit Alarm Setting mode.
TURNING OFF THE ALARM / SNOOZE OPERATION (FIG. 2)
The CHILL Bluetooth
®
Alarm Clock is equipped with gradual wake, which means that the
alarm begins soft and slowly gets louder. This will ensure a non-jarring wakeup.
• To turn off the alarm once the alarm begins to sound, press any button on the top of
the unit (except Snooze).
• To begin the snooze function, once the alarm begins to sound press the SNOOZE bar
located on the top of the CHILL and the alarm will be silenced (the or icon will
begin to flash).
Please note: You may only press the SNOOZE button during the Alarm mode for one
hour (7 times). After the seventh time, the alarm will turn off and will not sound again
until the next set time.
CHILL BLUETOOTH
®
ALARM CLOCK
CONTROLS AND CONNECTIONS
(Fig. 1)
(Fig. 2)
1. Power
2. Alarm 1
3. Tuner
4. Play/Pause
5. Snooze/Dim/Sleep
6. Alarm 2
7. Volume +/-
8. Source
FM
Antenna
Audio Input USB
Output
Time Set
6
4
8
7
3
2
1
DC Input
5
21