User's Manual

3
1. Vol Up/Next Song
2. Pause/Play/Hand-Free
3. Vol Down/Previous Song
4. Mode indicator
5. Micro USB Port
6. Charging indicator
7. Aux-in Port
8. Power On/Off Switch
Pairing a Bluetooth Speaker
1. To press the POWER ON button to turn on the speaker. The speaker is
defaulted in Bluetooth Mode.
2. Turn on your Bluetooth device, search “BT Model NO” and select the DS-1751
in your Bluetooth Setting and pair your Bluetooth device with the speaker.
If your device enquires a password, enter the default password’0000’.
3. When pairing, the Bluetooth indicator light flashes blue quickly.
4. When successfully paired and connected, there will be an indicator sound. And
the Mode indicator light will change from quick flashing to slow flashing.
After initial pairing, the unit will stay paired manually by the user.
Both the speaker and your Bluetooth device will store the device name. Next time, when you use the same
Bluetooth device to connect the speaker, no password is asked.
Remark: Press and Hold + and - at the same time to unpair the device.
Playing Audio Wirelessly
1. Follow the instruction of Pairing A Bluetooth Device
2. Adjust the volume by press or hold the + or - buttons or native controls on the
Bluetooth device.
3. Press
on the speaker to play/pause the tune or just control the tune by
press Play/Pause on the Bluetooth device.
4. Press the Hand-Free to answer incoming calls, streaming music will pause.
Then press the Hand-Free to end calls, streaming music will resume.
Using the 3.5mm Audio Input
1. Plug one end of a 3.5mm Audio input cable into the 3.5mm Audio Input on the
unit. The mode indicator light will display a red light.
2. Plug the other end of the 3.5mm Audio input cable into the audio
output/headphone output on an MP3 Player or other audio devices.
Status Indicator
Bluetooth pairing Blue light flash quickly
Paired Blue light flash slowly
Aux-in mode Red
Charging Red light
Fully Charged Green Light