User's Manual

speakers are removed from the base station. You can then enjoy the music from every room
in your home.
TO PLAY IPOD/IPHONE
1. Plug the AC adaptor into the DC in port at the rear of the speaker base, then into a
power supply. (100-240V/50Hz-60Hz AC electrical outlet).
Note:
The rechargeable lithium battery is built in. Before use we recommend charging the unit for
3 hours. Once the Speaker Base is plugged in, it will automatically charge the speakers when
they are placed on the Base. While charging the LED indicator is red and will turn green
when fully charged. Once the speakers are fully charged it is safe to remove them from the
Speaker Base.
TO PLAY IPOD/IPHONE
Press the power button on the speaker base to turn the unit on. Switch on the speakers to
play your iPod.
Note: Speaker is paired well in factory, end user no need to pair by themselves, in case
speaker lost the connection, please follow up below procedure:
Press pair button on speaker unit and speaker base, the blue Led on speaker unit and red
LED on Speaker base will be flashing, once paired, both Led will stop flashing and a paired
pop sound come out showing speaker has been paired well.