User's Manual

ListeningtoyourdevicewirelesslyoverBluetooth® (Fig.2)
TolistentoyourmusicusingtheBluetooth®wireless
connection,youneedtopairyourdevicewithTheCUBE:
1. MakesureyourdevicehasBluetooth®capability.
2. UsetheSOURCEbuttonontheCubetoselectBLUETOOTH.
3. Followtheinstructionsofyourdevicetopairtheunit.
4. PairyourdevicewiththeunitbyselectingHMDXCUBE
fromyourBluetooth®listingsonyourdeviceorselecting
YES.Ifprompted,enter“0000”asthe passcode.
5. PressplayonyourdeviceandusecontrolsontheCubeto
adjustdesiredvolume.
NOTE:Onceyouhavesuccessfullypairedyourdevice,youwill
notneedtorepeattheabovesteps.PleaseensuretheAUX
cableisunplugged,theunitsourceissettoBluetooth®and
yourdevicehasBluetooth®enabled. Theeffectiverangefor
thismodeisapproximately30feet.
ListeningtotheRadio/StationPresets(Figs.1&2)
Note:Forbestreception,fullyextendthewireantenna.DO
NOTstrip,alterorattachtootherantennas.
1. Tolistentotheradio,pressthePOWERbuttonlocatedon
topoftheCube.
2. PresstheSOURCEbuttonontheCubeuntilFMandstation
frequencyappearsonthedisplay.
3. UsetheFORWARDandREVERSEbuttonsonthetopofthe
unitortheSET/TUNEdial toselectdesiredstation.
4. PressthePOWERbuttontoturnunitoff.
Toset/listentostationpresets
1. Whileinradiomode,useFORWARDandREVERSEbuttonsor
theSET/TUNEdialtoselectdesiredstation.
2. PressandholdtheMEMbuttononthetopoftheCubeto
addthestationtoyourpresets.UsetheFORWARDand
REVERSEbuttonstoselectthedesiredpresetnumber(1‐10),
thenpressMEMagaintoset.
3. Tolistentostationpresets,presstheMEMbuttononthe
unittoscrollthroughtheradiopresets.
Listeningtoa non‐Bluetooth® audiodevice(Figs.1&2)
1. Usingthe3.5mmaudiocable(included),pluginthedevice
viatheAUXaudiolineinputlocatedontherearofthe
Cube.
2. Plugtheotherendoftheaudiocableintothelineoutor
headphonejackofyouraudiodevice.
3. PressthePOWERbuttonlocatedontopoftheCube.
4. PresstheSOURCEbuttonontheunituntiltheAUXicon
appearsonthedisplay.
5. Pressplayontheconnecteddevice.
NOTE:Youmayneedtoadjustthevolumeonyouraudio
devicetoachievepropervolume.
SleepFeature
WhilelisteningtotheBluetooth®,radioorAUXsources,press
theSNOOZEbuttontoactivatethesleepfeature.Thisallows
youtosetasleeptimerfor90,80,70...10,or5minutes.Once
set,theunitwillcontinueplayingforthesetlengthoftime,
thenwillautomaticallyturnoff.