User's Manual

Hold the button around 3 seconds, the bluetooth connection will be

terminated.

Playing Audio Wirelessly

1. Follow the instruction of Pairing A Bluetooth Device

2. Adjust the volume by press or hold the Vol-/+ buttons or native controls on the

Bluetooth device.

3. Press Play/Pause on the speaker to play/pause the tune or just control the

tune by press Play/Pause on the Bluetooth device.

4. Press Rewind or Next Forward to change the songs.

5. Press the Hand-Free to answer incoming calls, streaming music will pause.

Then press the Hand-Free to end calls, streaming music will resume.

Using the 3.5mm Audio Input

1. Plug one end of a 3.5mm Audio input cable into the 3.5mm Audio Input on the

unit.

The mode indicator light will display a red light.

2. Plug another end of the 3.5mm Audio input cable into the audio

output/headphone output on an MP3 Player or other audio devices.

3. Turn on the speaker, Audio will play through the connected device and will now

be heard through the speakers.

4. Press and hold the Volume Up and Volume Down to adjust the volume.

5. If you want to Play/pause the tune, just control the native buttons on your MP3

player.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these Instructions.

2. Keep these Instructions.

3. Heed all Warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.