User's Manual

3
Set up
1. To press the to turn on the speaker. The turns blue.
2. Speaker starts searching for Bluetooth device, and blue LED starts flashing.
3. Turn on your Bluetooth device, search “DS-1130” and press
to pair your
Bluetooth device with the speaker. Password is “0000”.
4. Once paired, LED will change flashing rate from quick flashing to slow
flashing.
5. Once paired successfully, both the speaker and your Bluetooth device will
store the device. Next time, when you use the same Bluetooth device to
connect the speaker, then no need to use the password.
6. When not in use, please turn off the speaker.
Listening to Bluetooth device
1. Play music from your Bluetooth device and enjoy your time with it.
2. Adjust the volume by press or hold the Vol-/+ buttons or native controls on the
Bluetooth device.
3. Press Play/Pause on the speaker to play/pause the tune or just control the
tune by press Play/Pause on the Bluetooth device.
4. Change the songs by press
or to play the previous song or next song.
5. Press and hold button
to disconnect the previous Bluetooth device,the
blue light will flash fast and the speaker is searching for new Bluetooth device.
Hand-free function
1. Press to answer incoming calls, streaming music will pause
2. Press again to end calls,streaming music will resume.
3.5mm Audio Input
Requires a 3.5mm audio cable (Included).
1. Connect a 3.5mm audio cable to the 3.5mm audio input on the speaker and an
audio output on an MP3 player or other audio sources.
2. Speaker needs to switch to Aux In mode by press
.The Aux-in mode indicator
light turns to red.
3. Press the Vol-/+ button or native controls on the connected MP3 player to
control volume.
4. If you want to Play/pause the tune, just control the native buttons on your MP3
player.