Warranty For Warranty Information and the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.com Contact Information Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 Website: www.iLiveElectronics.
Warnings and Precautions • • • • • WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture. WARNING: Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surface. Use a protective barrier between the unit and surface to protect the surface. WARNING : Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
Pairing a Bluetooth Device 1. Turn on the unit using the On/Off switch. The Pairing Indicator will flash blue quickly. 2. Press and hold the Pair button until a beep sounds. 3. Using the native controls on your Bluetooth device, select the “DS-1108” in your Bluetooth settings to pair. When pairing, remain within 3 feet of the unit. If your device requests a password, enter the default password “ 0 0 0 0 ”.
Playing Audio Wirelessly 1. Follow the instructions for Pairing a Bluetooth Device. 2. Use the native controls on the connected Bluetooth device to select a track. 3. To play, pause or skip the selected track, use the native controls on the connected Bluetooth device or press the Play/Pause button on the unit. 4. Audio played through the connected Bluetooth device will now be heard through the speakers. 5. Press and hold the Vol+/Vol- buttons to adjust the volume.
Using the Line Input 1. Plug one end of a 3.5 mm audio input cable (not included) into the Line Input on the unit. 2. Plug the other end of the cable into the audio output/ headphone output on an MP3 Player or other audio source. 3. Turn on the unit using the On/Off switch. 4. Audio played through the connected device will now be heard through the speakers. Note: Any audio being played through a connected Bluetooth Device will cease once the 3.5mm Audio source is connected.
USER’S GUIDE V: 712-01 DS-1108 ISB182 Portable Wireless Speaker For the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.
International Support To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at www.iLiveElectronics.com Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en www. iLiveElectronics.
Features Included • • • • • • • • • Supports profile A2DP (Advanced Audio Distribution Profile) Built-in speakers 3.
Power USB Power Requires a Micro USB to USB cable (included). During initial charge please continue to charge the unit for at least 2 hours after the battery indicator light has turned green. Note: PC must not be in sleep mode.
Introduction Pair Press and hold to begin connecting a Bluetooth device. Volume Press and hold to increase or decrease the volume. PAIR Pairing Indicator Play/Pause Press to play or pause.
Introduction On/Off Adjust the switch to turn the unit on or off. Always be sure to switch to the OFF position when not in use.
Line Input CHARGE BATTERY STATUS Micro USB Charging Port (Charging only) Low Battery Indicator Stand
