User's Manual

Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the Power
button.
2. Press the Source button to switch to
Bluetooth mode.
“PAIR” led will flash slowly.
3. Press and hold the Pair button until
“PAIR” flashes quickly.
When pairing, remain within 3 feet of the
unit.
4. Using the native controls on your
Bluetooth device, select the “ISDB752B” in
your Bluetooth settings to pair.
If your device requests a password, enter
the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your specific
device for instructions on pairing and
connecting Bluetooth devices.
5. When successfully paired and connected,
the PAIR LED will show solid display.
After initial pairing, the unit will stay paired
unless unpaired manually by the user or
erased due to a reset of the device.
If your device should become unpaired or
you find it is unable to connect, repeat the
above steps.
Note: ISDB752B can store up to 8 devices.
The ninth paired device will replace the
first stored device in the unit’s memory.
The tenth device paired will replace the
second stored unit and so on.
Playing Audio Wirelessly
1. Follow the instructions for Pairing a
Bluetooth Device.
2. Use the native controls on the
connected Bluetooth Device to select a
track.
3. To play or pause the selected track, use
the native controls on the connected
Bluetooth Device or press the Play/
Pause button.
4. Audio played through the connected
Bluetooth device will now be heard through the speakers.