User's Manual

Setup
Power
DC power input: requires an AC/DC power adapter (included)
Plug the side speaker connection cable into docking R/L line out jack.
iPod and iPhone and iPad
Docking an iPod or iPhone, or iPad
1. Connect the iPod or iPhone, or iPad to the connector inside the Dock for iPod
2. When the speaker is plugged in, using AC power, the docked iPod/iPHone/iPad
will charge.
Playing a Docked iPod/iPhone/iPad
1. Follow the instructions for Docking an iPod and iPhone and iPad.
2. Press the POWER button to switch on speaker and press SOURCE button to
switch to iPod mode.
3. Use the function buttons to control tracks and volume.
Remark: To see video in landscape orientation, push down the 30pin connector and
place iPad in landscape mode, connect iPad and speaker by 3.5mm audio cable.
To reset connector, please slide the RELEASE button.
3.5mm Audio Input and Composite Video Output
Using the 3.5mm Audio Input
Requires a 3.5mm audio cable
1. Connect a 3.5mm audio cable to the 3.5MM LINE IN on the speaker and an audio
output on an MP3 player or other audio source.
2. Press the SOURCE button to switch to Line In mode.
3. Use the native controls on the connected MP3 player or other audio source to play
and control audio played through the speaker.
Using the Composite Video Output
Requires an RCA composite video cable (included)
1. Connect the RCA composite video cable to the COMPOSITE VIDEO OUTPUT
on the speaker and a composite video input on a television.
2. Adjust the TV OUT settings on the docked iPod to OK.
3. Videos played from the docked iPod or iPhone
Bluetooth Function
1. Turn on speaker and Press the SOURCE button to switch to Bluetooth mode.
3. Use the native controls on the connected MP3 player or other audio source to play
and control audio played through the speaker.