User's Manual

1. If powered on, press the Power button to
turn the unit off.
2. Press the Clock Set/Mem button.
3. Press the Tuning+/- buttons to adjust the
hour.
The PM indicator will light when the hour
is set in the PM.
4. Press the Clock Set/Mem button.
5. Press the Tuning+/- buttons to adjust the
minute.
6. Press the Clock Set/Mem button again to
nish setting the time.
1. If powered on, press the Power button to
turn the unit off.
2. Press and hold the Al1 or Al2 button until
the display begins to blink, then release
the button.
3. Press the Tuning+/- buttons to adjust the
minute.
The PM indicator will light when the hour
is set in the PM.
4. Press the Tuning+/- buttons to adjust the
minute.
5. Press the Al1 or Al2 buttons to switch
between Radio and Beep.
6. Once the set alarm time is reached, the
alarm will sound.
To set the other alarm, follow the above
steps and choose the alarm not currently
set.
1. Power on the unit by pressing the Power
button.
2. Press the Source button to switch to FM
Radio mode.
3. Press the Tun+ and Tun-buttons to adjust
the radio to the desired frequency.
4. Press and hold the Tun+ and Tun- buttons
to search for the next available frequency.
5. Press the Vol+/- buttons to adjust the
volume.
6. Turn the radio off by pressing the Power
button.
Clock and Sleep Timer
Alarm
Radio
Setting the Clock
1. Power on the unit by pressing the Power
button.
2. Press the Source button to switch to FM
Radio mode.
3. Press the Sleep button repeatedly to set
the sleep timer ( 15, 30, 45, 60, 75, 90
min or OFF ).
4. Once the set sleep time has expired the
clock radio will automatically power off.
Setting the Sleep Timer
Setting the Alarm
1. Follow the instructions for Setting the
Alarm.
2. Press the Al1 or Al2 buttons repeatedly
until the indicator is no longer lit.
Cancelling the Alarm
After the alarm sounds:
Press the Sleep button to delay the alarm for
several minutes.
OR
Press the Power button to turn the alarm off
until the set alarm time is reached again.
Snooze and Alarm Reset
Tuning the AM or FM Radio
1. Follow the instructions for Tuning the
Radio and Saving a Station as a Preset.
2. Press the Clock Set/Mem button.
3. Press the Tun+ and Tun-buttons to cycle
through preset radio stations.
Tuning to a Preset Radio Station
Adjust the position of the FM Antenna to
improve FM radio reception.
Radio Reception
To download this User’s Guide in English,
Spanish, or French, or to get answers to
frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en
inglés, español y francés, o para obtener
respuestas a preguntas frecuentes, visite la
sección de apoyo en www.iLiveElectronics.
com
Pour télécharger ce guide de l’utilisateur en
anglais, espagnol ou français, ou pour obtenir
des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance
sur www.iLiveElectronics.com
International Support
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com Customer Service: 1-888-999-4215
Email Support: [e-mail], Email Parts: [e-mail]
Copyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.
Requires a 3.5mm audio cable (not included)
1. Connect a 3.5mm audio cable to the
Line In on the unit and an audio output
on an MP3 player or other audio source.
2. Use the native controls on the
connected MP3 player or other audio
source to play and control audio
played through the clock radio.
Line In
Using the Line In
Bluetooth Setup
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the Power
button.
2. Press the Source button to switch to
Bluetooth mode.
Bluetooth mode is indicated by “BT” on
the display.
“PAIR”will ash slowly on the display.
3. Press and hold the Pair button until
“PAIR” ashes quickly.
When pairing, remain within 3 feet of the
unit.
4. Using the native controls on your
Bluetooth device, select the “ICB352” in
your Bluetooth settings to pair.
If your device requests a password, enter
the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your specic
device for instructions on pairing and
connecting Bluetooth devices.
5. When successfully paired and connected,
the display will show “BT”.
After initial pairing, the unit will stay paired
unless unpaired manually by the user or
erased due to a reset of the device.
If your device should become unpaired or
you nd it is unable to connect, repeat the
above steps.
Note: ICB352 can store up to 8 devices.
The ninth paired device will replace the
rst stored device in the unit’s memory.
The tenth device paired will replace the
second stored unit and so on.
1. Follow the instructions in Pairing a
Bluetooth Device.
2. When a call is received, a ringtone will
sound through the speakers.
3. Press the Play/Pause/Talk/End button
to accept the call or accept the call with
the native controls on the connected
device.
4. The incoming call received through the
device will now be heard through the
speakers.
5. To end the call, press the Play/Pause/
Talk/End button or end the call using the
native controls on the connected device.
1. Follow the instructions for Pairing a
Bluetooth Device.
2. Use the native controls on the
connected Bluetooth Device to select a
track.
3. To play or pause the selected track, use
the native controls on the connected
Bluetooth Device or press the Play/
Pause/Talk/End button.
4. Audio played through the connected
Bluetooth device will now be heard
through the speakers.
Playing Audio Wirelessly
Using the Speakerphone
Saving a Station as a Preset
1. Follow the instructions for
Tuning the FM Radio.
2. Tune to the desired station.
3. Press and hold the Clock
Set/Mem button.
4. Press the Tun+/- buttons to
choose the preset number.
5. Press and hold the Clock Set/Mem
button to save the station as a preset.
Up to 20 stations may be saved as presets.